- INTRODUCTION OF BELLING MACHINE:
YS630 Double-oven Belling Machine is mainly used for PVC pipes with Smooth type (U-type) and Rubber ring type (R-type) socket and with Air blow tyoe socket (Blow-type). It can work with pipe extrusion line.This machine is fully automatic and easy to operate.
. Technical Specification.
| Pipe standards | Model | 630 Double-oven |
| Standard | U-PVC1002.1-2006 (as request) | |
| Diameter | 315-630mm | |
| Length | 3m-6m | |
| Heating | Heating Way | One heating oven with air fan,Stainless steel heating tube with a heat sink |
| Power of Heating fan | 0.37kw*2 | |
| Water ring in the heater | Stainless steel, in case of the end of pipe burning | |
| Pipe Rotary | Clockwise and anti-clockwise | |
| Thermocouple | K-type | |
| Temperature control Moudle | Siemens | |
| Heating power for one heater | 27KW (1.8kw*15pcs heating tubes) | |
| Total power of heater | 27KW *2=54kw | |
| Electrical component | PLC and Screen | Siemens, without password |
| Iow-voltage apparatus | Schneider, Omron | |
| Total Power | 70.5kw | |
| Use voltage | 380V, 50HZ, 3-phase (as request) | |
| Pneumatic | Compressed air pressure | 0.6MPA |
| Pneumatic valve | Airtac (Taiwan brand) | |
| Quantity of air bag/collection | 2pcs | |
| Cubage of air bag | 300L*2 | |
| Water | Water pressure | 0.3MPA |
| Material of cooling barrel | Stainless steel | |
| Water tank for cooling | Stainless steel | |
| Motor of water pump | 1.36kw | |
| Hydraulic | Hydraulic pressure | 6.3-8.0MPA |
| Hydraulic oil | LHM-46, about 80 litre | |
| Solenoid valve | Unix | |
| Oil pump motor power | 5.5kw | |
| Oil cylinder | ZHEJIANG YOLON | |
| Chiller for oil tank | 1pc | |
| Equipmentappearance | Machine type | Automatic, single line, one pipes per cycle |
| Center height | 1000mm (as request) | |
| Height adjustment | Elertrical-via button | |
| Machine color | Light grey RAL9002 (as request) | |
| Machine dimension | 10800mm(L)x3900mm(W)x2920mm(H) 1*40HQ | |
| Machine weight | 5800kgs | |
| Operating principle | U-type | Pushing the mould into pipe directly |
| R-Type | With air pressure chamber and collapsibel mandrel and vacuum pump system Vacuum pump:Zhejiang Xinhuan, 5.5kw Pressure of vacuum air: -0.06Mpa | |
| Blow-type | Blow air by inner mould, and take shape by outer mould | |
| Cooling type | R-Type and U-type: Water-cooling Blow-type: Air-cooling | |
| Machine speed | 120S to 900S | |
| Mould material | U-type: 45# steel with Cr electroplating | |
| R-Type: The collapsible parts are 4Cr13 and 40Cr, other parts 45# steel with Cr electroplating | ||
| Blow-type:Inner mold: 45# steel, then electroplating, Outer mold:Aluminum. |
